Mountz Mountz TT500FH TT500FH Dial Measuring Torque Screwdriver (1/4 F/Hex)

Mountz TT500FH TT500FH Dial Measuring Torque Screwdriver (1/4 F/Hex) Review

Mountz TT500FH TT500FH Dial Measuring Torque Screwdriver (1/4 F/Hex) Feature

• The preferred and certified ranges of these tools is in accordance with the requirements of ISO 6789 - 2003 (+/- 6% of indicated reading).
• Flat tension spring is used to give the best linear characteristics in both directions.
• Quality constructed with stainless steel shafts, attractive colored aluminum handles and sturdy dials for maximum tool life.
• Dual American and S.I. graduated scales.

Mountz TT500FH TT500FH Dial Measuring Torque Screwdriver (1/4 F/Hex) Overview

The TT500FH TT500FH Dial Measuring Torque Screwdriver (1/4 F/Hex) is designed for precision assembly and quality control applictions. A dial indicator displays real time application and removal torque. Memory system holds maximum torque reached. TT dial measuring torque screwdrivers can be used to monitor torque as it increases or decreases or to display peak torque applied.

Mountz Mountz BMX500i Torque Reaction Transducer

Mountz BMX500i Torque Reaction Transducer Review

Mountz BMX500i Torque Reaction Transducer Feature

• BMX Transducer: Specifications
• Rated Output: 2mv/v Nominal
• Safe Overload: 125% of Rated Output
• Bridge Resistance: 350 Ohms Nominal
• Nonlinearity: .1% of Rated Output
• Accuracy .25% of full scale ( 0.5% for 10,000F & 20,000F models)
• Female square drive
• Bi-directional measurement
• Mounting brackets available, optional

Mountz BMX500i Torque Reaction Transducer Overview

The BMX500i Torque Reaction Transducer is used for calibrating hand screwdrivers, wrenches, and power tools.

Mark-10 Mark-10 CAP-TT03-100 Hand-held Cap Torque Meter With Data Output, Cap. 100 lbf-in / 1150 N-cm, Complete Kit

Mark-10 CAP-TT03-100 Hand-held Cap Torque Meter With Data Output, Cap. 100 lbf-in / 1150 N-cm, Complete Kit Review

Mark-10 CAP-TT03-100 Hand-held Cap Torque Meter With Data Output, Cap. 100 lbf-in / 1150 N-cm, Complete Kit Feature

• Accuracy: 0.5% of full scale 1 digit
• Sampling rate: 2,000 Hz
• Power: C or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
• Battery Life: Backlight on; up to 7 hours of continuous use | Backlight off; up to 24 hours of continuous use
• Measurement units: lbFin, ozFin, kgFmm, Ncm (depending on model)
• USB Output: Individual data point output by pressing DATA key. Configurable up to 115,200 baud.
• Configurable Settings: Digital filters, USB output settings, backlight, automatic shutoff, key tones, audio alarms, default settings, calibration
• Safe overload: 150% of full scale (display shows OVER at 110% and above)
• Weight: 1.8 lb [0.8 kg]
• Environmental requirements: 40F - 100F [5C - 45C], <96% humidity (non-condensating)
• For cap diameters of 0.65 - 1.55 in (16.5 - 39.0 mm)
• High-speed 2,000 Hz sampling rate
• Single Reading USB data output
• Programmable set points with pass/fail indicators
• Battery or AC operation
• Configurable audio alarms and key tones
• Live load bar graphs with set point markers
• CE mark
• Made in the USA
• Peak memory for clockwise and counter clockwise readings saved and displayed

Mark-10 CAP-TT03-100 Hand-held Cap Torque Meter With Data Output, Cap. 100 lbf-in / 1150 N-cm, Complete Kit Overview

The CAP-TT03-100 Hand-held Cap Torque Meter With Data Output, Cap. 100 lbf-in / 1150 N-cm, Complete Kit is designed to measure the open and closure torque on bottles, vials, jars and more. This portable instrument is ideal for odd shaped containers that cannot be secured in traditional table top testers. Serrated jaws securely grip cap diameters of 0.65 - 1.55 in (16.5 - 39.0 mm). Measure Peak or real-time torque on the large back lit LCD display (clockwise and counter-clockwise directions). The Series TT03C is available in three capacities from 12 lbf-in / 135 N-cm (MTT03C-12), 50 lbf-in / 570 N-cm (MTT03C-50) & 100 lbf-in / 1150 N-cm (MTT03C-100).

Mark-10 Mark-10 STE50 Wrench Extension Torque Transducer, Cap. 50 lb-in / 580 kgF-mm / 570 N-cm

Mark-10 STE50 Wrench Extension Torque Transducer, Cap. 50 lb-in / 580 kgF-mm / 570 N-cm Review

Mark-10 STE50 Wrench Extension Torque Transducer, Cap. 50 lb-in / 580 kgF-mm / 570 N-cm Feature

• Accuracy: 0.6% of full scale 1 digit + BGI
• Warranty: 3 years
• Member of the BGI family of interchangeable sensors
• Stainless steel and aluminum construction
• "Personality module" holds all calibration and configuration data
• NIST-traceable certificate of calibration included

Mark-10 STE50 Wrench Extension Torque Transducer, Cap. 50 lb-in / 580 kgF-mm / 570 N-cm Overview

The STE50 Wrench Extension Torque Transducer, Cap. 50 lb-in / 580 kgF-mm / 570 N-cm is used in conjunction with our BGI Torque / Force Indicator to form a complete measuring system. STE Wrench Extension Torque Transducer. It converts any wrench to a torque tool with this sensor, or use it as a component of a torque testing system.

Checkline Checkline CAP-TSTM-50i Motorized Cap Torque Testing System, Cap. 50 lbin / 580 kgFmm / 570 Ncm, 220V

Checkline CAP-TSTM-50i Motorized Cap Torque Testing System, Cap. 50 lbin / 580 kgFmm / 570 Ncm, 220V Review

Checkline CAP-TSTM-50i Motorized Cap Torque Testing System, Cap. 50 lbin / 580 kgFmm / 570 Ncm, 220V Feature

• Speed Range: 0.3-8.6 RPM (4-52/s)
• Speed Accuracy: 5% (Optional Digital Speed Control for higher accuracy)
• Throat: 4.10" (104 mm)
• Maximum Cap Diameter: 3.5" / 89mm
• Manual Adjustment: 12/knob rev
• Maximum Silder Travel: 15.5" (394 mm)
• Slider Travel Rate: 1.047" (26.6 mm) / level rev
• Motorized clockwise and counterclockwise rotation allows for highly precise and repeatable tests
• No speed variation with load
• Torque plate with tapped holes for grip and fixture mounting
• Includes NIST Calibration Certificate
• 100 In-Lb Capacity
• Optional Digital Angle Indicator Displays cw or ccw angle in 0.1 resolution for approximately 278 rotations, resettable with "zero" button

Checkline CAP-TSTM-50i Motorized Cap Torque Testing System, Cap. 50 lbin / 580 kgFmm / 570 Ncm, 220V Overview

The CAP-TSTM-50i Motorized Cap Torque Testing System, Cap. 50 lbin / 580 kgFmm / 570 Ncm, 220V is designed to perform open and closure torque measurements on caps, lids, etc... This Cap Torque Testers features a motorized clockwise and counterclockwise rotation that allows for highly precise and repeatable tests. Its Versatile modular design allows the stand to be configured with a variety of gripping fixtures while a lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient. The stand includes a torque loading plate with tapped holes for grip and custom fixture mounting and a resetable angle indicator.

Imada Imada HTG2-40L Digital Torque Gauge

Imada HTG2-40L Digital Torque Gauge Review

Imada HTG2-40L Digital Torque Gauge Feature

• Accuracy: 0.5 % Full scale 1 digit
• Sampling Rate: 30 times/s
• Display: 4 digit, 14 mm high
• Overload capacity: 150 % Full scale (flashing LED beyond 108% full scale) open collector output signal
• Zero adjustment: 10% Full scale
• A/D converter: 16 bit
• Memory: non-volatile, recall up to 960 loads, recall both peaks, open and close torque
• Setpoints: Min, Max (programmable), with output signal
• Output signal: RS232C (8,1,N,19200), analog 2V DC, Open collector 4x (+NG, Ok, -NG, OVL), max. 30V DC, 10mA, Mitutoyo Digimatic
• Temperature range: 5 - 45C
• User-selected units of Pounds, Kilograms or Newtons
• RS-232C, Digimatic and Analog outputs
• Runs on internal NiCad batteries or AC adapter
• 1000 Data memory for computer download
• Display "real-time" or "peak" force
• Both clockwise and counterclockwise operation
• Tare function
• Overload capacity 200% of F.S.
• Ergonomic design with non-slip rubber grip, heavy duty metal construction
• Overload alarm and output signal

Imada HTG2-40L Digital Torque Gauge Overview

The HTG2-40L Digital Torque Gauge is a precision instrument that offers programmable high/low set-points for go/no-go testing. ORANGE lights up for measurements less than Low set-point, GREEN for between High and Low set-point, and RED for over High set-point. Store up to 1,000 values in memory, which can be displayed or transmitted using serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.

Mountz Mountz BLRTSX36F-R Brushless Rotary Shaft Transducer

Mountz BLRTSX36F-R Brushless Rotary Shaft Transducer Review

Mountz BLRTSX36F-R Brushless Rotary Shaft Transducer Feature

• Accuracy: 0.2% of full scale
• Rated Output: 5VDC 0.2% FS
• Excitation Recommended: 11VDC to 26VDC (pole secure)
• Nonlinearity: 0.2% FS
• Usable Temperature Range: 41 to 122 F
• Mating Connector: Tuchel Series 581 (98-2030-09-12)
• Safe Overload: 150% of Rated Output
• Accuracy +/- 0.2% of full scale
• Non-contact signal transfer and maintenance free
• The brushless rotary torque & angle sensor is a compact design & bi-directional

Mountz BLRTSX36F-R Brushless Rotary Shaft Transducer Overview

The BLRTSX36F-R Brushless Rotary Shaft Transducer is used in-line with rotating shafts or nut-runners for feed back control. Motor testings, high RPM Tools or rotational measurement applications. RA Models: Angle output 2-channel quadrature, 360 pulses per rotation, Ability to measure the rotation angle of a fastener, Joint rate & breakaway torque can be measured too.

Mountz Mountz BLRTSX148F-RA Brushless Rotary Angle Shaft Transducer

Mountz BLRTSX148F-RA Brushless Rotary Angle Shaft Transducer Review

Mountz BLRTSX148F-RA Brushless Rotary Angle Shaft Transducer Feature

• Accuracy: 0.2% of full scale
• Rated Output: 5VDC 0.2% FS
• Excitation Recommended: 11VDC to 26VDC (pole secure)
• Nonlinearity: 0.2% FS
• Usable Temperature Range: 41 to 122 F
• Mating Connector: Tuchel Series 581 (98-2030-09-12)
• Safe Overload: 150% of Rated Output
• Accuracy +/- 0.2% of full scale
• Non-contact signal transfer and maintenance free
• The brushless rotary torque & angle sensor is a compact design & bi-directional

Mountz BLRTSX148F-RA Brushless Rotary Angle Shaft Transducer Overview

The BLRTSX148F-RA Brushless Rotary Angle Shaft Transducer is used in-line with rotating shafts or nut-runners for feed back control. Motor testings, high RPM Tools or rotational measurement applications. RA Models: Angle output 2-channel quadrature, 360 pulses per rotation, Ability to measure the rotation angle of a fastener, Joint rate & breakaway torque can be measured too.

Checkline Checkline TSD-400 Digital Torque Screw Driver

Checkline TSD-400 Digital Torque Screw Driver Review

Checkline TSD-400 Digital Torque Screw Driver Feature

• Accuracy: +/- 2.5% F.S., +/- 1 LSD
• Display: 4 digit LCD
• GO/NO GO testing: 9 Programmable setpoints with both audible beep and Green/Red LED indicator
• Power Supply: One (1) AAA Battery (included)
• Auto Power Save: Automatic switch off after 5 minutes of non-use
• Working Time: 12 hours continuous use
• Bit Size: 6.35 mm
• Weight: 430g
• Warranty: 1 Year
• Clockwise & Counter Clockwise Torque Measurement
• 9 Programmable Target Torque Setpoints
• Real time & Peak Torque Measurement

Checkline TSD-400 Digital Torque Screw Driver Overview

The TSD-400 Digital Torque Screw Driver is designed for accurate measurement of application and removal torque of screws and fasteners. An LCD display measures bi-directional torque in real-time or peak modes.

Cedar Cedar DID-4 Digital Torque Screw Driver, 35 lb-in Capacity

Cedar DID-4 Digital Torque Screw Driver, 35 lb-in Capacity Review

Cedar DID-4 Digital Torque Screw Driver, 35 lb-in Capacity Overview

The DID-4 Digital Torque Screw Driver, 35 lb-in Capacity is a torque measuring manual screw driver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software. The DID-4 Digital Torque Screw Driver, 35 lb-in Capacity is a Torque Screwdriver that has an accuracy of +/- 0.5% F.S., +/-1 LSD and has programmable set-points that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Built-in ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.