Mark-10 Mark-10 STE20 Wrench Extension Torque Transducer, Cap. 20 lb-in / 230 kgF-mm / 220 N-cm

Mark-10 STE20 Wrench Extension Torque Transducer, Cap. 20 lb-in / 230 kgF-mm / 220 N-cm Review

Mark-10 STE20 Wrench Extension Torque Transducer, Cap. 20 lb-in / 230 kgF-mm / 220 N-cm Feature

• Accuracy: 0.6% of full scale 1 digit + BGI
• Warranty: 3 years
• Member of the BGI family of interchangeable sensors
• Stainless steel and aluminum construction
• "Personality module" holds all calibration and configuration data
• NIST-traceable certificate of calibration included

Mark-10 STE20 Wrench Extension Torque Transducer, Cap. 20 lb-in / 230 kgF-mm / 220 N-cm Overview

The STE20 Wrench Extension Torque Transducer, Cap. 20 lb-in / 230 kgF-mm / 220 N-cm is used in conjunction with our BGI Torque / Force Indicator to form a complete measuring system. STE Wrench Extension Torque Transducer. It converts any wrench to a torque tool with this sensor, or use it as a component of a torque testing system.

AWS AWS AWS-4050 Digital Torque Display, Operating Temp 0 - 50 C, 220V

AWS AWS-4050 Digital Torque Display, Operating Temp 0 - 50 C, 220V Review

AWS AWS-4050 Digital Torque Display, Operating Temp 0 - 50 C, 220V Feature

• Battery Type: NiMH
• Line Input Power: 12 VDC (mains adapter provided)
• Operating Temp: 0 - 50 C
• Dimensions (LxWxH): 6.5" x 3" x 2.75"
• Weight: 1.8 Lbs
• Single-step access to all functions.
• Light (8) available engineering units - oz-in, lb-in, lb-ft, N-m, cN-m, Kgf-cm, gf-cm, Kgf-mm.
• RS-232 output
• NiMH rechargeable batteries provide at least 8-10 hours continuous use.
• Can be calibrated to virtually any manufacturers strain gauge transducers.
• Bidirectional accuracy of 0.5% of indicated reading with AWS transducers, 1% of indicated reading with rotary transducers.
• 3 modes of operation - Track, Peak and 1st Peak.
• Visual limit alarms.
• Selectable power tool filtering speeds - 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz.
• For testing click, dial, and digital wrenches, plus most power tools including impulse and DC electric.

AWS AWS-4050 Digital Torque Display, Operating Temp 0 - 50 C, 220V Overview

The AWS-4050 Digital Torque Display, Operating Temp 0 - 50 C, 220V is a portable, versatile, simple, and accurate instrument that Test the torque of joints and tools. The AWS-4050 Digital Torque Display takes only seconds to change test parameters and works in either one button or automatic modes of operation. The Intellect Transducer interface allows any compatible transducer to be connected with proper calibration, with no input necessary from the operator. The quality built into the 4050 assures accuracy and durability.

Cedar Cedar DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range

Cedar DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range Review

Cedar DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range Feature

• Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m
• Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
• Peak, Real Time and Peak Down measuring mode (selectable)
• Statistics: number of data, Max, Min, Avg
• Programmable screw tightening counter
• CW, CCW ratchet and fixed operation
• bluedot Runs on internal NiCad batteries (8 hour use) Auto shut-off after 10 min. of non-use
• Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
• USB data output for SPC capability
• 800 data memory for recall or for SPC download

Cedar DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range Overview

The DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range is a torque measuring manual screw driver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software. The DID-4 Cedar Digital Torque Screwdriver with Memory & USB Data Output with ISO-17025 Calibration Cert, 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range is a Torque Screwdriver that has an accuracy of +/- 0.5% F.S., +/-1 LSD and has programmable set-points that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Built-in ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.

Cedar Cedar DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V

Cedar DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V Review

Cedar DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V Feature

• Heavy duty metal construction
• lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m (see table below)
• 800 data memory for recall or for SPC download
• USB output for SPC capability
• Peak, Real Time and Peak Down measuring modes (selectable)
• Accuracy: 0.5% F.S. 1 LSD (32 to 100F)
• Both clockwise and counterclockwise operation
• AC adapter/charger included
• Runs on internal NiCad batteries (8 hour use)
• Programmable High/Low setpoints with GO/NO GO LED indicators and audible beep

Cedar DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V Overview

The DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB downloadfor analysis by Imada data acquisition software SW-1SV-USB. Calibrateyour own torque wrenches and electric drivers and and save down time.

Mark-10 Mark-10 MGT-100 Digital Torque Gauge, Capacity 100 lb-in, 220V

Mark-10 MGT-100 Digital Torque Gauge, Capacity 100 lb-in, 220V Review

Mark-10 MGT-100 Digital Torque Gauge, Capacity 100 lb-in, 220V Feature

• Accuracy: 0.5% of full scale 1 digit
• Sampling Rate: 30 times/s
• Overload capacity: 150% of capacity
• Power supply: 9V battery or AC adapter
• Housing dimensions: See Drawing
• Weight: 1.8 lbs (0.8 kg)
• Warranty: 3 Years
• Display "real-time" or "peak" force
• Units of measure: lbf-in, kgf-mm, and N-cm (selectable)
• Battery life: 30 hours of continuous operation
• Push-button calibration
• Includes NIST calibration certificate
• Battery or AC operation
• 3 Year Warranty

Mark-10 MGT-100 Digital Torque Gauge, Capacity 100 lb-in, 220V Overview

The MGT-100 Digital Torque Gauge, Capacity 100 lb-in, 220V is a rugged solution for most torque measurement applications. A dedicated remote torque sensor with a Jacobs chuck can be used to grip a sample or fixture. The MGT is available in a wide variety of capacities, from 12 lbf-in to 100 lbf-in.

Mountz Mountz TT50FH TT50 Dial Measuring Torque Screwdriver (1/4 F/Hex)

Mountz TT50FH TT50 Dial Measuring Torque Screwdriver (1/4 F/Hex) Review

Mountz TT50FH TT50 Dial Measuring Torque Screwdriver (1/4 F/Hex) Feature

• The preferred and certified ranges of these tools is in accordance with the requirements of ISO 6789 - 2003 (+/- 6% of indicated reading).
• Flat tension spring is used to give the best linear characteristics in both directions.
• Quality constructed with stainless steel shafts, attractive colored aluminum handles and sturdy dials for maximum tool life.
• Dual American and S.I. graduated scales.

Mountz TT50FH TT50 Dial Measuring Torque Screwdriver (1/4 F/Hex) Overview

The TT50FH TT50 Dial Measuring Torque Screwdriver, Range 14 70 ozf.in, Drive 1/4" F/Hex is designed for precision assembly and quality control applictions. A dial indicator displays real time application and removal torque. Memory system holds maximum torque reached. TT dial measuring torque screwdrivers can be used to monitor torque as it increases or decreases or to display peak torque applied.

Mountz Mountz SDX50i Transducer REQUIRES Display (PTT, LTT or WizardPlus)

Mountz SDX50i Transducer REQUIRES Display (PTT, LTT or WizardPlus) Review

Mountz SDX50i Transducer REQUIRES Display (PTT, LTT or WizardPlus) Feature

• REQUIRES Display (PTT, LTT or WizardPlus)
• Accuracy +/- 0.25% of full scale
• Drive Size 1/4" F/Hex
• Operates with Torque & Force sensors

Mountz SDX50i Transducer REQUIRES Display (PTT, LTT or WizardPlus) Overview

The SDX50i High Precision Digital Torque Screw DriverTransducer, Range 5 - 50 lbf-in is used for auditing or tightening fasteners to a specified torque when mated with a torque analyzer. Ergonomic rubber grip and stainless steel Female/Hex bit holder. Features instant auto-recognition of the SDX when connected to the LTT or PTT. Connect to a torque analyzer to monitor, test or audit a fastener. Safe Overload: 125% of Rated Output.