Cedar Cedar DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V

Cedar DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V Review

Cedar DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V Feature

• Heavy duty metal construction
• lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m (see table below)
• 800 data memory for recall or for SPC download
• USB output for SPC capability
• Peak, Real Time and Peak Down measuring modes (selectable)
• Accuracy: 0.5% F.S. 1 LSD (32 to 100F)
• Both clockwise and counterclockwise operation
• AC adapter/charger included
• Runs on internal NiCad batteries (8 hour use)
• Programmable High/Low setpoints with GO/NO GO LED indicators and audible beep

Cedar DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V Overview

The DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 220V is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB downloadfor analysis by Imada data acquisition software SW-1SV-USB. Calibrateyour own torque wrenches and electric drivers and and save down time.