Cedar Cedar DIW-75 Digital Torque Wrench with USB Data Output, 3/8" Drive, Capacity 680 lbf-in

Cedar DIW-75 Digital Torque Wrench with USB Data Output, 3/8" Drive, Capacity 680 lbf-in Review

Cedar DIW-75 Digital Torque Wrench with USB Data Output, 3/8" Drive, Capacity 680 lbf-in Feature

• Accuracy: 0.5%, 1 LSD
• Sampling Frequency: 100 Hz (100 samples/sec)
• Display Update Rate: 5 Hz (5 times/sec)
• RS232 Throughput: 80 Hz, max (80 sample/sec,max)
• Memory: 400 data memory for recall or for SPC download
• Warranty: 2 years
• Includes NIST calibration Certificate
• Wrench head swivels 300
• Available in lbf-in, lbf-ft, Kgf-cm and N-m (selectable)
• Peak, Real Time and Peak Down measuring mode (selectable)
• 400 data memory for recall or for SPC download
• Programmable High and Low setpoints with both audible beep and Green/ Red LED indicator for uniform torque tightening or GO/NO GO testing
• Both CW and CCW operation
• RS-232 output for SPC capability (peak data only)
• CW stepless one-way clutch adapter, AC charger and carrying case included.
• Runs on internal NiCad batteries (8 hour use)

Cedar DIW-75 Digital Torque Wrench with USB Data Output, 3/8" Drive, Capacity 680 lbf-in Overview

The DIW-75 Digital Torque Wrench with USB Data Output, 3/8" Drive, Capacity 680 lbf-in is a lightweight digital torque wrench that tightens or loosens bolts up to 1040 lbf-in. The wrench head swivels 300 and can be used in tight places. You will get consistent readings no matter where or how the wrench is gripped because the torque sensor is centered on the drive and not up in the handle. Torque controlled wrenches can also be evaluated by comparative tests on a given fastener. Both breakaway and loosen tests can be performed. This Digital Torque Wrench is rugged enough to be used in production.